# Connect Tagtool with Resolume through an ElGato capture device

**URL:** https://www.tagtool.org/t/connect-tagtool-with-resolume-through-an-elgato-capture-device/2363
**Category:** Support
**Tags:** recording, troubleshooting, resolume
**Created:** [January 17, 2024, 2:25am UTC](https://www.tagtool.org/t/connect-tagtool-with-resolume-through-an-elgato-capture-device/2363 "2024-01-17T02:25:57Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![Barce](https://cdn.tagtool.org/letter_avatar_proxy/v4/letter/b/f08c70/32.png) [@Barce](https://www.tagtool.org/u/Barce)
#### Post date: [January 17, 2024, 2:25am UTC](https://www.tagtool.org/t/connect-tagtool-with-resolume-through-an-elgato-capture-device/2363/1 "2024-01-17T02:25:57Z")

</div>

Hi! I’m trying to connect Tagtool with Resolume through an ElGato capture device. I can see that the capture is displaying the Tagtool image, but afterward, in Resolume, I can’t see Tagtool in the output 😞. [You can observe the problem in this video](https://drive.google.com/file/d/1oc9uKz0UyH6KuD8E_DOo9GY7sy507roX/view?usp=drive_link). What can you recommend to me?

Thank you!

---

<div class="post-metadata">

### Author: ![iink](https://cdn.tagtool.org/user_avatar/www.tagtool.org/iink/32/133_2.png) [@iink](https://www.tagtool.org/u/iink)
#### Post date: [January 17, 2024, 11:36am UTC](https://www.tagtool.org/t/connect-tagtool-with-resolume-through-an-elgato-capture-device/2363/2 "2024-01-17T11:36:25Z")

</div>

Hello,

Do you have another software (Modul8, etc..) to test - if the Cam4k is working and sending correctly?

In Resolume you can check if your Cam4k “Clip” that is selected in the timeline has the correct input format.

For example:  
When i have an NDI input selected. You can change some input options that might help.

 ![Screenshot 2024-01-17 at 12.30.07](https://cdn.tagtool.org/uploads/default/original/2X/1/13019f771a59713b812d15034db2c0a323546707.jpeg)

best,  
mat

---

<div class="post-metadata">

### Author: ![Barce](https://cdn.tagtool.org/letter_avatar_proxy/v4/letter/b/f08c70/32.png) [@Barce](https://www.tagtool.org/u/Barce)
#### Post date: [January 21, 2024, 3:14pm UTC](https://www.tagtool.org/t/connect-tagtool-with-resolume-through-an-elgato-capture-device/2363/3 "2024-01-21T15:14:27Z")

</div>

Hi! Thanks for your help, Mat. I made a lot of changes, and the capture didn’t run, but at one moment, it mysteriously began to run. I hope to understand what happened after some time of using it. Meanwhile, I’m enjoying drawing with Tagtool in Resolume 🙂