# Madmapper and Tagtool
**URL:** https://www.tagtool.org/t/madmapper-and-tagtool/1442
**Category:** Support
**Tags:** setup-guide, madmapper, ipad
**Created:** [June 6, 2019, 1:53am UTC](https://www.tagtool.org/t/madmapper-and-tagtool/1442 "2019-06-06T01:53:35Z")
**Posts on this page:** 5
**Page:** 1
### Author:  [@DAVIDDIVINE](https://www.tagtool.org/u/DAVIDDIVINE)
#### Post date: [June 6, 2019, 1:53am UTC](https://www.tagtool.org/t/madmapper-and-tagtool/1442/1 "2019-06-06T01:53:35Z")
Hi! Does anyone know how to link up Tagtool with mad mapper? I can’t find any videos or info online, Step by Step Instructions would be nice. I’m running a 2019 iPad for TAGTOOL and a new MAC for Madmapper. Thanks!
---
### Author:  [@iink](https://www.tagtool.org/u/iink)
#### Post date: [June 7, 2019, 11:04am UTC](https://www.tagtool.org/t/madmapper-and-tagtool/1442/2 "2019-06-07T11:04:36Z")
Hi there,
There is a thread about that here:
> [@How to record a Tagtool video?](https://www.tagtool.org/t/how-to-record-a-tagtool-video/144):
>
> There are 2 common ways to capture a video signal from an iPad. WIRELESSLY Software like [Airserver](http://www.airserver.com/) or [Reflector](http://www.airsquirrels.com/reflector/features/mac/) offer ways to send the output of an iPad directly to your laptop. It´s a very good solution to capture up to 720p resolution videos if you use a 5 GHz network and have a rather new ipad model with a Wi-Fi (802.11a/b/g/n/ac). It also allows to use the Tagtool videosignal in most VJ software like [Modul8](http://www.nonuts.de/blog/2015/11/8/using-module-with-tagtool) or [Resolume](http://resolume.com/blog/10403/tagtool-lt-3-resolume-lt-3-neonrost) via Syphon. CAPTURE DEVICE If you want high resolution videos i would…
The upcoming Tagtool Player will support syphon/spout to make the video signal management more easy and reliable.
best,
Mat
---
### Author:  [@DAVIDDIVINE](https://www.tagtool.org/u/DAVIDDIVINE)
#### Post date: [June 7, 2019, 2:32pm UTC](https://www.tagtool.org/t/madmapper-and-tagtool/1442/3 "2019-06-07T14:32:48Z")
Thank You Mat! I really appreciate your help.
---
### Author:  [@whiteemotion](https://www.tagtool.org/u/whiteemotion)
#### Post date: [July 5, 2019, 11:20am UTC](https://www.tagtool.org/t/madmapper-and-tagtool/1442/4 "2019-07-05T11:20:31Z")
Hi everyone Did anyone found the solution? I still managed to connect it to reflector but still no idea on how to syphon it to connect it to madmapper. Thanks best wishes
---
### Author:  [@iink](https://www.tagtool.org/u/iink)
#### Post date: [July 5, 2019, 5:51pm UTC](https://www.tagtool.org/t/madmapper-and-tagtool/1442/5 "2019-07-05T17:51:13Z")
Not sure if the latest “Reflector” supports syphon. “Airserver” supports it last time i used it.